Lightweight
buoy for use in shallow, sheltered water with various possible
applications and configurations
PB700 Buoys, Port and Starboard Configuration.
Technical specification
| |
PB600 |
PB700 |
| Colours |
Red, Green, White, Yellow |
| Focal Height |
900mm |
1265mm |
| Material |
Rotationally Moulded UV Stabilised Virgin Polyethylene |
| Wall Thickness |
6mm |
6mm |
| Ballast |
Internal Steel Shot |
| Foam-filling |
Closed-cell polyurethane |
| Reserve Buoyancy |
14 kg |
120 kg |
| Draft |
275 mm |
240 mm |
| Height |
1075 mm |
1450 mm |
| Width |
600 mm |
700 mm |
| Weight |
16 kg |
33 kg |
Options
The PB600 or PB700 can be supplied with the following options:
• Special Top Mark
• Radar Reflector
• Solar Lantern
• Moorings to suit the site conditions
• Moulded-in Lettering
|
Durable
rotationally moulded hull and integral day mark, with facility
to carry an LED lantern and radar reflector.
- Very lightweight Hull and integrated Daymark, made from is
high-quality UV stabilised virgin polyethylene.
- Buoy can be coloured red, green, yellow, or white in accordance
with IALA recommendations.
- Daymark has moulded inserts to directly accept an LED lantern
such as our PL82 or PL72 at an acceptable focal height
for short range lighting.
- Hull is foam-filled to assist floatation in the event of damage,
allowing buoy to be recovered safely.
- Hull is ballasted with shot, to give the best stability to
suit the application.
- Moulded-in Stainless steel lifting eye (PB700 only) and mooring
eye.
- Light overall weight enables launch or recovery by hand from
a small boat.
- Applications include: marking navigation channels, hazards,
fish farms, or zones.
PB600 with optional lettering to mark a ‘no-go zone’ for
boats.
Detail of the PB700 lifting eye, and lantern mounting inserts.
|
INDUSTRIAL
MEMBER INTERNATIONAL ASSOCIATION OF LIGHTHOUSE AUTHORITIES 
