Ideal programmable
flasher where direct connection to telemetry is not required
Technical specification
| Weight |
: |
250 grams |
| Voltage range |
: |
6.0 to 22 volts DC |
| Idle current |
: |
<1 milliamps |
| Efficiency |
: |
>99% @ 20w load |
| Operating temperature |
: |
-40° C to +60° C |
| Output voltage |
: |
4.5 to 18 +/- 2% |
| Output power |
: |
2 to 120 watts at 12v |
Interfaces with Bi-filament and PA6 series lamp changer. Ideal
for use with the complete Pelangi lantern series where remote monitoring
is not required.
|
The EASYFLASH
flasher has been designed and manufactured to drive standard marine
DC lamps.
- Capable of driving any lamps up to 10 amps from an input voltage
range of 6 to 22 volts with lamp regulation 4.5 to 18 volts RMS.
- Re-programmable parameters, capable of driving lamp at any
character.
- Suitable for use with bi-filament or lampchanger. Counts lamp
in service, number of hours burned with 1st and 2nd lamp alarms.
- Monitors low battery with programmable load disconnect set
at 4.5 to 15 volts.
- Built in photocell with programmable light levels. External
cell can also be used.
- Provides programmable night dimming in conjunction with
photocell.
- Provision for optically isolated synchronising
or ripple flashing with programmed delays for each “Buoy Gate”.
- Mechanically interchangeable with ELCO-12 series, NAVFLASH
and PROFLASH flashers.
Optional extras
- Full Windows 95/98 or NT compatible programme available for
customer self programming.
- Desk top adapter available for direct connection to PC through
LEMO connector.
- LEMO connector interchangeable with COMMUNICATOR link.
|
INDUSTRIAL
MEMBER INTERNATIONAL ASSOCIATION OF LIGHTHOUSE AUTHORITIES 
